Jump to calculator
Advertisement

Board Foot Calculator

Board feet = thickness (in) × width (in) × length (ft) ÷ 12. A 2×4 that is 8 ft long is 5.33 board feet, and ten of them are 53.33. Enter your boards below to add waste and cost.

Board Foot Calculator

Quick tools

Reopen recent results anytime.

Scenario presets

Pick a lumber list to start from

Load a sample list, then change any size, quantity, or price.

Board 1

Default 10% for cuts and defects. Use 0 to skip waste.

Enter the price from your own quote.

Quick checks

•

Use nominal sizes for lumber: a 2x4 counts as 2 in by 4 in

Quick checks

•

Use the rough thickness for hardwood: 4/4 is 1 in, 8/4 is 2 in

Quick checks

•

Add a waste factor for cuts and defects, and price per board foot if you have a quote

Board foot basics

Pick the right sizes before you count board feet

Softwood and hardwood use different size rules, and both change the board foot total.

Softwood lumber (2x4, 1x6)

Count the nominal size, not the smaller finished size.

  • •A 2x4 counts as 2 in by 4 in
  • •Length is the stock length you buy
  • •Add waste for cuts and bad boards
Yards sell most softwood by the piece or by linear foot, not by board foot. Ask how your supplier prices it.

Hardwood (4/4, 8/4)

Thickness is sold in quarters of an inch, measured rough.

  • •4/4 is 1 in, 8/4 is 2 in
  • •Width and length often vary board to board
  • •Enter each size as its own row
Planing removes thickness, but you still pay for the rough size. Order extra if you need a finished thickness.

Pricing by board foot

Multiply total board feet by the price per board foot.

  • •Price the order with waste included
  • •Compare quotes at the same thickness
  • •Ask if the price is rough or surfaced
Prices differ by species, grade, and region. Use a real quote, not a guess.

What this calculator does not decide

It counts board feet from the sizes you enter. It does not pick species, grade, or finished thickness, so confirm those with your supplier.

Fast lumber rules

Start with the rules that change your board foot count

Check the formula, the size you enter, and the unit before you order.

Board foot formula

Board feet = thickness (in) × width (in) × length (ft) ÷ 12. A 2×4 that is 8 ft long is 5.33 board feet.

If length is in inches, use thickness × width × length (in) ÷ 144.

Nominal or actual size

Use the nominal size. A 2×4 counts as 2 in by 4 in, even though the finished board is smaller.

Hardwood is different: use the rough thickness in quarters, such as 4/4 for 1 in.

Board feet to linear feet

Linear feet = board feet × 12 ÷ (thickness × width). For 1×6 boards, 10 board feet is 20.0 linear feet.

The table below shows common sizes.

How to calculate board feet

One board foot is a piece of wood 1 in thick, 12 in wide, and 1 ft long. That is 144 cubic inches. The calculator works out how many of those units your boards hold.

  • Length in feet: thickness (in) × width (in) × length (ft) ÷ 12
  • Length in inches: thickness (in) × width (in) × length (in) ÷ 144
  • Several pieces: board feet per piece × quantity
  • With waste: total board feet × (1 + waste %)
  • Cost: total board feet × price per board foot

Worked examples

The numbers below come from the same functions the calculator uses.

Item Calculation
Formula thickness (in) × width (in) × length (ft) ÷ 12
One 2×4, 8 ft 2 × 4 × 8 ÷ 12 = 5.33 board feet
Ten 2×4s, 8 ft 5.33 × 10 = 53.33 board feet, 80.0 linear ft
One 8/4 board, 6 in × 10 ft 2 × 6 × 10 ÷ 12 = 10.00 board feet
Length in inches 1 × 6 × 48 in = 1 × 6 × 4 ft ÷ 12 = 2.00 board feet
Cost at $6 per board foot (example input) 10.00 BF × 1.10 waste = 11.00 BF; × $6 = $66.00

The price in the last row is an example input. Use the price from your own quote.

Nominal vs actual lumber size

Lumber for sale is counted by its nominal size. A 2×4 counts as 2 in by 4 in, even though a surfaced board measures about 1.5 in by 3.5 in. The table shows board feet for an 8 ft piece both ways. Use the nominal column to match how lumber is sold. Finished sizes vary a little by mill and moisture, so check your supplier.

Nominal size Typical finished size (in) BF per 8 ft (nominal) BF per 8 ft (finished size)
1×4 0.75 × 3.5 2.67 1.75
1×6 0.75 × 5.5 4.00 2.75
1×8 0.75 × 7.25 5.33 3.63
1×12 0.75 × 11.25 8.00 5.63
2×4 1.5 × 3.5 5.33 3.50
2×6 1.5 × 5.5 8.00 5.50
2×8 1.5 × 7.25 10.67 7.25
2×10 1.5 × 9.25 13.33 9.25
2×12 1.5 × 11.25 16.00 11.25
4×4 3.5 × 3.5 10.67 8.17

Hardwood thickness in quarters

Hardwood is sold by rough thickness in quarters of an inch. The top number is quarters, so 4/4 is 1 in and 8/4 is 2 in. Planing removes some thickness, but you still count the rough size. The table uses a board 6 in wide and 8 ft long.

Quarter size Thickness (in) BF for 6 in × 8 ft
4/4 1 4.00
5/4 1.25 5.00
6/4 1.5 6.00
8/4 2 8.00
12/4 3 12.00

Board feet to linear feet

Linear feet = board feet × 12 ÷ (thickness × width). Use it when a seller quotes by the board foot and you cut by the foot, or the other way around. Sizes are nominal.

Size Linear ft in 10 BF Linear ft in 100 BF
1×4 30.0 300.0
1×6 20.0 200.0
1×8 15.0 150.0
1×12 10.0 100.0
2×4 15.0 150.0
2×6 10.0 100.0
2×8 7.5 75.0
2×12 5.0 50.0

Before you order

  • Ask the unit: Hardwood is often sold by the board foot. Many yards price common softwood by the piece or linear foot.
  • Check rough or surfaced: Prices and sizes differ for each.
  • Plan the cuts: Match your cut list to board lengths before you add waste.

How we checked this page

Written by: TheSiteMath Editorial Team
Reviewed by: TheSiteMath editors (formula, source, and update review)
Last reviewed: 2026-11-14
Publisher: TheSiteMath
Scope: U.S. construction material estimating, calculator workflows, and project planning guidance for contractors and homeowners.
What we checked:
  • • Formulas checked against trade and source material
  • • Verified against: Current U.S. material pricing benchmarks, TheSiteMath calculator and content cross-check workflow, Final local code, permit, and supplier verification before purchase
  • • Price ranges used for planning, not as fixed quotes
  • • Examples checked in the live calculator
Methodology:
  • • Example quantities and explanations on this page are cross-checked against the matching live calculator on TheSiteMath.
  • • This lumber content is scoped for U.S. planning and estimating workflows, not for stamped engineering or permit approval.
  • • We review formulas, material assumptions, and practical steps against category-appropriate references before publishing updates.
  • • We refresh pages when calculator logic, supplier assumptions, or pricing guidance materially changes.
  • • Readers should confirm final dimensions, structural requirements, and local code obligations with qualified local professionals.
Editorial standards: We review pages before publication and update them when formulas or pricing need a fix. If you spot an issue, please contact us .

For our review process, corrections policy, and monetization disclosure, see the Editorial Standards page.

Board Foot FAQ

Board foot questions before you buy lumber

These questions cover the board foot formula, nominal versus actual size, hardwood thickness, linear feet, and price per board foot.

How do you calculate board feet?

Multiply thickness in inches by width in inches by length in feet, then divide by 12. A 1 in by 12 in board that is 1 ft long is 1.00 board foot. A 2×4 that is 8 ft long is 2 × 4 × 8 ÷ 12 = 5.33 board feet. Ten of them make 53.33 board feet.

How do you calculate board feet when the length is in inches?

Multiply thickness by width by length in inches, then divide by 144. You can also change inches to feet first. A 1 in by 6 in board that is 48 in long is 4 ft long, so it is 1 × 6 × 4 ÷ 12 = 2.00 board feet.

Do I use nominal or actual size?

Use the nominal size when lumber is sold by the board foot. A 2×4 counts as 2 in by 4 in. At 8 ft that is 5.33 board feet. The finished 1.5 in by 3.5 in board would measure 3.50. Hardwood uses rough thickness in quarters, so 8/4 means 2 in.

How many board feet is an 8/4 board?

An 8/4 board is 2 in thick. At 6 in wide and 10 ft long it is 2 × 6 × 10 ÷ 12 = 10.00 board feet. At 6 in wide and 8 ft long, 4/4 is 4.00 board feet and 8/4 is 8.00.

How do I convert board feet to linear feet?

Linear feet = board feet × 12 ÷ (thickness × width). For a 1×6, 10 board feet is 20.0 linear feet. For a 2×4, 100 board feet is 150.0 linear feet. Use the same nominal size you used for the board foot count.

How do I find lumber cost per board foot?

Multiply total board feet by the price per board foot. As an example input, a 2×6 that is 10 ft long is 10.00 board feet. At $6 per board foot, that is $60.00. With 10% waste you would buy 11.00 board feet for $66.00. Use the price from your own quote, because it changes with species, grade, and region.

How much waste should I add?

This calculator starts at 10%. Add more for long cut lists, knots, or boards with defects. A list of 3 boards at 2×4×8 and 2 boards at 1×6×10 is 26.00 board feet. With 10% waste that becomes 28.60.

Is lumber always sold by the board foot?

No. Hardwood is often priced by the board foot. Many yards sell common softwood by the piece or by the linear foot. Ask your supplier which unit the quote uses before you compare prices.

Advertisement

Projects / Pro

Loading plan details...